All ID Johor

Mobile Computers

iData K8 Cold Mobile Computer

iData K8 Cold is an innovative smart terminal that survives ultra-low temperature -30℃ environments. With the help of condensation-free technology, K8 Cold will heat itself automatically to defog condensation generated both inside and outside the scan window and screen. The device also meet high-standard working requirements of order recording, sorting, inbound and outbound management in the cold storage environments, boosting workers’ productivity dramatically.

Download Brochure

Send Enquiry
Survives condensation-free requirement in high standard cold storage

Scan window, screen and device will heat automatically; Device working in different parts of cold storage can maintain functional.

Withstand long time testing under -30℃

Works normally for over 12 hours under -30℃; No need to restart while replacing battery; Operates continuously for a whole day.

Increase fulfilled order quantity

Captures information of name, product origin, and weight on GS1-EAN·UCC barcodes; Accumulates weight automatically to complete inbound and outbound, or inventory.

Long distance picking and sorting on forklift

Engine supports up to 21.4m long distance scanning; Captures barcodes on shelves or goods far away while working on a forklift; Recognizes shelves and conforms goods waiting to be sorted quickly

Strengthen gripping experience during sorting

Back wide groove with texture and back strap design; Secure the device on hand, convenient to be held by one hand

System Configuration
Processor Octa-core 2.0GHz high-performance processor
Operating System Android12.0(GMS)
Memory (ROM+RAM) 64GB+4GB (standard)
SIM Dual Nano SIM card
Expansion Slot Micro SD card (up to 256GB)
Display Screen 4-inch, resolution: 800*480 IPS HD Retina screen
Touch Screen Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera 13 megapixels of rear camera, support auto-focus; 5 megapixels of front camera
Flashlight 800mA flashlight
Keypad 34 keypads in total: front key*29, side scan key *2, side PTT key *1, side ± volume key *2
Battery 3.85V lithium battery, with 6700mAh, detachable, backup-battery support
Audio Built-in dual microphone (noise-canceling microphone)
Charging Method Type-C charging and pin port charging, support 9V/2A, 5V/3A fast charging
Reminder High-power speaker/3 sides scan LED reminder/Vibration reminder/charging LED reminder
Vibration Motor Built-in vibration motor
Sensors G-sensor/ Proximity sensor/Light sensor
Intercom Function (Optional) Support one-button PTT calls
Structure Parameter
Dimension (H*W*D) 205mm*76mm*31mm
Weight 458g (including the battery)
Communication Transmission
WWAN (Network Frequency) Chinese & Eurasian Version
WLAN Function Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi)support Wi-Fi 5G PA amplifier
Bluetooth Bluetooth 5.0, support BLE
Environmental Parameter
Working Temperature -30℃ – 50℃
*Do not charge under low temperature conditions for the safety concerns
Storage Temperature -40℃~70℃ (without the battery)
Humidity 0 – 95% (no moisture condensation)
Drop Specification Multiple drops to concrete floor from the height of 1.5m (without protective case)
Multiple drops to concrete floor from the height of 1.8m (with protective case)
Roller Drop Specification 1000 times of roller drops from a height of 1 meter
Ingress Protection IP68
ESD Protection ±15KV (air discharge), ±8KV (contact discharge)
Scanning Engine
Barcode Type It can scan one-dimensional / two–dimensional barcodes
Scanning Accuracy ≥3.33mil
Scanning Angle Pitch: ±60°; Skew:±45°; Tilt:360°
View Angle Horizontal:44.3°,Vertical:28.4°,Diagonal:51°
Motion Error Tolerance 8m/s
NFC (Standard)
Working Frequency 13.56 MHz
Reading Distance Within 60 mm
Communication Protocol ISO14443A/14443B/15693
Communication Interface
USB Interface Type-C (with headset function) *1
OTG Interface Support
Charging Interface 8-pin charging port
Development Support
Programming Language Java
Development API iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface
Development Tool Eclipse/Android Studio