All ID Johor

Mobile Computers & Tablets

iData T2 UHF RFID Mobile Computer

iData T2 UHF is a 4G high-performance RFID terminal with efficient RFID reading capability and 4G communication capability, which can meet the needs of rapid business growth of enterprises for equipment performance. It improves workers’ efficiency and help enterprise to cope with future challenges confidently.

Download Brochure

Send Enquiry
Efficient RFID reading, designed for business

The tag reading rate is faster than 700 tags/s, which can help workers save 40% of their time and complete their work faster when dealing with massive inventory work.

Dynamic Duty Cycle Algorithm

It adjust RFID working time dynamically based on the quantity of the tags; It improves the module’s efficiency, thus extending the lifespan of the module. It reduce heat and optimise the power consumption of the whole Device.

Dual Battery Life Guarantee

4500mAh build-in battery housing +6500mAh detachable battery in handle. The battery of house can guarantee the stable operation when they replace the battery of the handle. It’s time-saving that there’s no need reset and re-login.

5G Communication, More Effective Outdoors

The peak rate can reach up to 20bps, while the lowest delay is just a few milliseconds.

System Configuration
Processor Octa-core 2.0GHz high-performance processor
Operating System Android12.0(GMS)
Memory (ROM+RAM) 64GB + 4GB (standard), 128GB+6GB(optional)
SIM Two out of three SIM card slots, support dual SIM and dual standby
*Two out of three SIM card slots: two cards can be held at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF card
Expansion Slot Micro SD card (up to 256 GB)
Display Screen 6.21-inch, resolution: 1520*720 pixels
Touch Screen Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera 16 megapixels top camera, support auto-focus/PDAF, 5 megapixels front camera;
Flashlight 800mA flashlight
Keypad 6 keypads in total: scan key *2, power key *1, volume key*2, pistol trigger *1
Battery 3.85V lithium battery, with 4500mAh, undetachable
3.7V lithium battery, with 6700mAh, detachable
Audio Built-in microphone
Charging Method Type-C and Pin-port charging, support 18W fast charging
Reminder Vibration reminder/LED reminder/high power speaker/Audio reminder
Vibrating Motor Built-in vibrating motor
Sensor G-sensor/Proximity sensor/Light sensor/Geomagnetic sensor/ Gyroscope
Intercom Function (Optional) Support one-button PTT calls
Cooling fan (Optional) Built-in cooling fan
Structure Parameter
Dimension (L*W*D) 168mm*97mm*14.5mm
Weight 680g (including the battery)
Communication Transmission
WWAN (Network Frequency) China & Eurasian version:
2G:B2/B3/B5/B8
3G:WCDMA:B1/B5/B8,CDMA BC0,TD-SCDMA:B34/B39
4G:FDD-LTE:B1/B3/B5/B7/B8/B20,TDD-LTE:B34/B38/B39/B40/B41
American version:
2G: B2/B3/B5
3G: B1/B2/B4/B5,CDMA&EVDO:BC0/BC1 (U.S.)
4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41
WWAN (Data Service) GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO/WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE
WLAN Function Wi-Fi 802.11a/b/g/n/ac/d/e/h/i/j/k/r/v/w (2.4G + 5G dual-band Wi-Fi), support fast roaming
Bluetooth Bluetooth 5.0
GPS GPS/AGPS/Beidou/Galileo/GLONASS/QZSS
Environmental Parameter
Working Temperature -20℃ – 60℃
*Do not charge under low temperature conditions for the safety Concerns
Storage Temperature -40℃ – 70℃(Without battery)
Humidity 0 – 95% (no moisture condensation)
Drop Specification Multiple drops to concrete floor from the height of 1.5m
Roller Drop Specification 1000 times of roller drops from a height of 0.5 meter
Ingress Protection IP67
ESD Protection ±15KV (air discharge), ±8KV (contact discharge)
Scanning Engine
Barcode Type It can scan one-dimensional / two-dimensional barcodes
Scanning Accuracy ≧3.33mil
Scanning Angle Pitch: ±60°; Skew:±45°; Tilt:360°
View Angle Horizontal:44.3°,Vertical:28.4°,Diagonal:51°
Motion Error Tolerance 8m/s
NFC (Optional)
Working Frequency 13.56 MHz
Reading Distance Within 60 mm
Communication Protocol ISO14443A/14443B/15693
UHF RFID
Communication Protocol ISO18000-6C/EPC Class1 Gen2
Frequency 920MHz~925MHz/902MHz~928MHz/865MHz~868MHz
Output Power 8~33dBm
Antenna Circular polarization antenna
Reading Distance Up to 20m
Reading Rate Up to 700tags/s
Communication Interface
USB Interface Type-C (with headset function) *1
OTG Interface Support
PSAM (Optional) Support PSAM*1
Development Support
Programming Language Java
Development API iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface
Development Tool Eclipse/Android Studio
Accessories
Standard Accessories USB cable*1, power adapter*1
Optional Accessories Single charging cradle, 4-slot charging cradle, 2-slot battery charging cradle, protective film
Note
****** As the product line is updating from time to time, the information in this document is subject to change without notice.

Categories

Brand