All ID Johor

Mobile Computers & Tablets

iData K1S Ultra Rugged Mobile Computer

Time-tested & cost-effective option

iData K1S is an ultra-rugged Android keyboard-type smart terminal, which is time-tested in many scenarios such as new retail business, warehouses, manufacturing plants, express and logistics, etc. It improves the working capacity without increasing your purchase cost. By adding a pistol grip, K1S is able to deal with high-frequency scanning in inventory process.

Download Brochure

Send Enquiry
Multifunctional to meet requirements of different scenes

Equipped with iData’s self-developed scanning engine, K1S can easily scan damaged, dirty, DPM barcodes, etc. The breakthrough Wi-Fi roaming technology, as well as the 5G PA amplifier, enable a better network experience in complex environments.

Battery life designed for 1.5 shifts

The 4400mAh large battery can be used for 12 hours, which can meet the needs of long shifts and reduce the loss caused by equipment downtime. The battery is detachable so that it can work continuously right after the battery replacement.

Enterprise-level protection to reduce malfunction losses

IP65 makes the equipment waterproof, dustproof, rainproof and snowproof. It can work the sun and rain environments outdoors. The 1.5-meter anti-drop design enables users to mount the equipment on forklifts, shelves and other heights confidently. This device is designed to survive accident drops.

System Configuration
Processor Octa-core 2.0GHz high-performance processor
Operating System Android 9.0 (GMS) / Android 11.0 (GMS)
Memory (ROM+RAM) 64GB + 4GB (standard)
SIM Single SIM card
Wi-Fi Only:SIM not available
Expansion Slot Micro SD card (up to 256GB)
Display Screen 4-inch, resolution: 800*480 pixels
Touch Screen Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera 13 megapixels of rear camera, support auto-focusing/PDAF
Flashlight 800mA flashlight
Keypad 26 keypads: front key*23, side scan key *2, side power key *1
Keypad Backlight White
Battery 3.8V lithium battery, with 4400mAh, detachable, backup-battery support (support on selected terminals)
Audio Built-in microphone
Charging Method Type-C charging and pin port charging
Reminder Vibration reminder/LED reminder
Vibrating Motor Built-in vibrating motor
Sensors G-sensor/ Proximity sensor/Light sensor
Intercom Function (Optional) Support one-button PTT calls
Structure Parameter
Dimension (L*W*D) 168mm*71mm*26mm
Weight 270g (including the battery)
Communication Transmission
WWAN (Network Frequency) China & Eurasian version:
2G: 900/1800
3G: WCDMA:B1/B8
4G: FDD-LTE:B1/B3/B7/B8/B20,TDD-LTE: B34/B38/B40
American version:
2G: B2/B3/B5
3G: B1/B2/B4/B5,CDMA&EVDO:BC0/BC1 (The United States)
4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41
Wi-Fi Only Version:Not available
WWAN (Data Service) GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO/WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE
Wi-Fi Only Version:Not available
WLAN Function Wi-Fi 802.11a/b/g/n/r/ac/i/k/v (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier
Bluetooth Bluetooth 5.0, support BLE
GPS GPS
Environmental Parameter
Working Temperature -20℃ – 60℃
*Do not charge under low temperature conditions for the safety concerns
Storage Temperature -40℃ – 70℃ (without the battery)
Humidity 0 – 95% (no moisture condensation)
Drop Specification Multiple drops to concrete floor from the height of 1.5m
Roller Drop Specification 1000 times of roller drops from a height of 0.5 meters
Ingress Protection IP65
ESD Protection ±15KV (air discharge), ±8KV (contact discharge)
Scanning Engine
Barcode Type It can scan one-dimensional / two-dimensional barcodes
Scanning Accuracy ≥3.33mil
Scanning Angle Pitch: ±60°; Skew:±45°; Tilt:360°
View Angle Horizontal: 44.3°,Vertical: 28.4°,Diagonal: 51°
Motion Error Tolerance 8m/s
NFC (Optional)
Working Frequency 13.56MHz
Reading Distance Within 30mm
Communication Protocol ISO14443A/14443B/15693
Communication Interface
USB Interface Type-C (with headset function) *1
OTG Interface Support
Development Support
Programming Language Java
Development API iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface
Development Tool Eclipse/Android Studio
Accessories
Standard Accessories USB cable*1, power adapter*1, hand strap*1, device-back strap*1, battery*1
Optional Accessories Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, pistol grip, fanny pack, protective film, protective case
Note
****** Due to irregular updates of the product line, the content is subject to change without notice.

Categories

Brand